Will be releasing exact method of UFO propulsion very soon.

Dejan Corovic

As above, so bellow
After 4 years of methodical pouring through papers written by many professional scientists who worked on UFOs and the electro-magnetic data left behind UFOs I finally found out how UFO propulsion works. Propulsion method had been technologically feasible since late 1940s and it doesn't need metamaterials. Relatively speaking, method is very low tech, depending on what technical skills one has. It's just a combination of existing technologies that had been in a everyday use for 50-70 years. I am about 90% certain, 10% is uncertain.

One part is unexplained Hutchison effect, the other part will be revealed soon. As far as I can tell, method is not in conflict with any existing scientific theory, it just slightly modifies general relativity. Broadly speaking, method is based around enthropic approach to gravity, which had been recently popular among mainstream scientists, like Eric Verlinde, for some time. Watch this space.

Method can be experimentally proven in a modestly equipped electronics lab, for less $100,000 in six to nine months. Experiment trumps theory and experimental results can not be disputed. That's the beauty of experimental proof. Importantly, method can not be patented, but there will be tens and hundreds of opportunities for spin-off patents. So there is both commercial and scientific future to the project.

I worked over last few months to pair down cost of experiment. Other teams working on similar technology are funded to $2M or higher. I got costs down twenty times cheaper. In a case of failure about 30-50% of the money can be recovered through sale of the lab of equipment, rest goes on stuff salaries and premises. In a highly likely case of success of the experiment, sky is the limit. We are starting new aerospace industry from a scratch. I can easily organize other scientists who would be keen to peer review and repeat experiment so that experiment can gain acceptance by broader scientific community. In turn that would enable this project to attract bigger investors. Anybody inclined to financing this project or having ideas how to finance this project is welcome.

Currently three are three teams in US who are actively working on reverse engineering UFO technology. It is just a question of time when Elon Musk's SpaceX will be out of business.

Your thoughts, please ...
 
Last edited:

spacecase0

earth human
I would like to see your ideas,
this has been a research topic of mine for about 30 years,
pretty sure I know a functional explanation of how gravity works
hopefully soon I will either prove my ideas true or disprove them.
if my testing fails to give results (one way or the other I should know somewhat soon), then I am all for helping your project.
I am fairly good at prototyping things at this point.

and I totally agree on the point that you don't need fancy materials to pull it off.
none of the theories show fancy materials needed.
and my previous test setup had nothing fancy, and it altered gravity a tiny but clear amount.
 

Dejan Corovic

As above, so bellow
It's actually not my idea (which is always a good thing :). I got there about 2/3 of the way doing my own research into UFO electromagnetic physical evidence and the connections between Hutchinson and general relativity. Than, while I was looking for supporting evidence for my theory, I luckily stumbled upon a guy who pulled it off all the way and came up with the missing 1/3, that I didn't even know that was missing :). He was way smarter than us all.

I can tell you my 2/3 :). Basically it boils down to repeating conditions that UFOs create around themselves, super strong static electric and/or magnetic fields, plus microwaves. One needs to have a reasonably strong 'holding' field, can be electric or magnetic, and than one shoots microwaves at 90deg to the direction of the holding field. I know from research that in a case one is using magnetic field as holding field, less than 0.7 Tesla would work for aluminum. For 0.7T one doesn't need super-conductor, it can be done with either a chunky electro-magnet or a chunky Neodymium magnets from eBay. Problem with permanent Neodymium magnets is that field needs to be ultra homogeneous (evenly distributed) across the sample and permanent magnets tend to be strong but very granular and maybe produce uneven field. That's why one should go for a simple C shaped electro-magnet with plain iron core. Iron or even so called silicone steel have much smaller grain than permanent magnets and can produce very even field, but electro-magnets can produce field 3 to 6 times weaker than perm. mgnts. I found iron bars 100mm (4") thick on eBay relatively cheap.

That's how Hutchinson did it, although without knowing what he was doing and that luck of understanding made his experiments such a hit and miss. Hutchinson always had electric field as holding field, produced by big electrostatic Van der Graaff generator that featured in many of his videos, and than he shot microwaves from Tesla coils, antennae, waveguides or even WWII radar dishes. He was doing constant frequency changing and phase shifting, so more or less, Hutchinson was a living Monte Carlo simulation. On occasions, when he would stumble onto right frequency and right phase shift, for a period of 30-120 seconds (my guess) he would get levitation. Importantly, levitation was acting on both insulators and conductors, because underlying principle would not make much difference as to electric properties of material. As well, levitation would always happen far away from the Hutchinson's EM sources. That means that, luckily, method doesn't depend on power output, but actually on resonance. As all engineers know resonance is energy accumulation method, rather than brute force. But resonance can be as powerful and destructive as brute force. Second reason why levitation was happening at random places away was shear number of combinations required for effect to happen somewhere in vicinity of sources. But it worked. In late 80's early 90's Hutchinson developed his skills enough to produce five levitation events per hour, I think, even in front of some of his investors.

Some equipment that Hutchinson mentioned that he was using was: 2THz WW2 radar, X-band radar jammer, 45GHz radio frequency generator.

Resonance thing was strongly suggested by my research into UFO physical trends. UFOs always, in almost 90% of cases, rise from a ground, to about 7m (20ft) and hover for few seconds, maybe 5-20 sec. than they shoot off at a high speed. That could be for two complementary reasons, to reduce exposure of nearby surroundings to microwaves they produce (in case a flabbergasted human is standing near by in shock & terror) and to build up the resonance because it takes a short while.

upload_2019-7-18_8-52-51.png
This is a mega simplified illustration of A-Piece-of-Chicken working principle.​

Second part of the whole thing that make UFOs operate I choose to call a-piece-of-chicken method. Just to make it easier for laymen to understand. When you put a-piece-of-chicken into microwave oven, to heat it up, what causes heating up is that microwaves start rotating water molecules, because water molecules are asymmetric in one plane (actually axially symmetric). Now, my idea was that super fast rotation of molecules, at like 2.4GHz which is 2,400,000,000 times per second, general relativity would kick in and fast spinning atomic nuclei would invoke gravito-magnetic effects (predicted by GTR and confirmed by NASA with Gravitational Probe B satellite). The reason a-piece-of-chicken doesn't take off in the microwave oven is that 1) there is no holding field to line up all the atoms/molecules in the same direction, 2) microwaves are bouncing off the oven's walls in random patterns, making water molecules orientation chaotic, 3) microwaves need to be arranged into a very precise timing pattern called Larmor frequency.

Now that's what this other guy had figured out. Larmor frequency is a natural precession resonance frequency of the atomic nuclei and it depends on particular isotope and holding field strength. That is why TTSA found in UFO material samples that isotopes are arranged exactly in 33.3% each, that is to manage precession of nuclei, like a gearbox if you like. Larmor freq. is used in Nuclear Magnetic Resonance NMR machines, in hospitals, and in Electron Paramagnetic Resonance EPR machines used in chemistry. Precession of the nuclei can be managed and it's routinely done in NMR and EPR machines. One aligns nuclei up (in a line with holding field), than you turn on or off sideways microwaves. Turning microwaves on/off, through nuclei's precession, flips the nuclei from aligned with holding field, to misaligned with holding field. The time between allurement & misalignment is called relaxation time. Relaxation time is very short, for most materials, at room temperature, but if one cools the sample and coils down with say liquid Nitrogen (again, eBay stuff) one can get relaxation times much longer. We are talking miliseconds. If you repeat that nuclei flipping process, say million times, which would take only few seconds, you start reducing gravitational and inertial mass of the material through accumulated resonance. It is very similar to adiabatic magnetic cooling, but you are reducing mass, instead of temperature.

As I said, Larmor frequency depends on the material and holding field's strength. Right material and wrong microwave frequency and you get nothing. Right material, right microwave frequency, wrong holding field strength, you would get nothing. One needs to get all three right, plus the timing and anything will fly. Equations are available online, so it's not that hard. That's is exactly why Hutchinson was struggling. He simply stumbled on the effect while playing with Tesla coils (very slow microwaves) and Van der Graaff generators (strong electrostatic holding field). Larmor frequencies are listed online for different materials. The best are Hydrogen and Sodium, but among metals Aluminum is the ticket.

Essentially, one needs a well equipped RF/microwave laboratory, some instrument integration and programming skills, few DIY devices, like C-shaped electro-magnet and you are good to go. And few other pieces, but lets not bog ourselves down with details.
 
Last edited:

Shadowprophet

Truthiness
It's actually not my idea (which is always a good thing :). I got there about 2/3 of the way doing my own research into UFO electromagnetic physical evidence and the connections between Hutchinson and general relativity. Than, while I was looking for supporting evidence for my theory, I luckily stumbled upon a guy who pulled it off all the way and came up with the missing 1/3, that I didn't even know that was missing :). He was way smarter than us all.

I can tell you my 2/3 :). Basically it boils down to repeating conditions that UFOs create around themselves, super strong static electric and/or magnetic fields, plus microwaves. One needs to have a reasonably strong 'holding' field, can be electric or magnetic, and than one shoots microwaves at 90deg to the direction of the holding field. I know from research that in a case one is using magnetic field as holding field, less than 0.7 Tesla would work for aluminum. For 0.7T one doesn't need super-conductor, it can be done with either a chunky electro-magnet or a chunky Neodymium magnets from eBay. Problem with permanent Neodymium magnets is that field needs to be ultra homogeneous (evenly distributed) across the sample and permanent magnets tend to be strong but very granular and maybe produce uneven field. That's why one should go for a simple C shaped electro-magnet with plain iron core. Iron or even so called silicone steel have much smaller grain than permanent magnets and can produce very even field, but electro-magnets can produce field 3 to 6 times weaker than perm. mgnts. I found iron bars 100mm (4") thick on eBay relatively cheap.

That's how Hutchinson did it, although without knowing what he was doing and that luck of understanding made his experiments such a hit and miss. Hutchinson always had electric field as holding field, produced by big electrostatic Van der Graaff generator that featured in many of his videos, and than he shot microwaves from Tesla coils, antennae, waveguides or even WWII radar dishes. He was doing constant frequency changing and phase shifting, so more or less, Hutchinson was a living Monte Carlo simulation. On occasions, when he would stumble onto right frequency and right phase shift, for a period of 30-120 seconds (my guess) he would get levitation. Importantly, levitation was acting on both insulators and conductors, because underlying principle would not make much difference as to electric properties of material. As well, levitation would always happen far away from the Hutchinson's EM sources. That means that, luckily, method doesn't depend on power output, but actually on resonance. As all engineers know resonance is energy accumulation method, rather than brute force. But resonance can be as powerful and destructive as brute force. Second reason why levitation was happening at random places away was shear number of combinations required for effect to happen somewhere in vicinity of sources. But it worked. In late 80's early 90's Hutchinson developed his skills enough to produce five levitation events per hour, I think, even in front of some of his investors.

Resonance thing was strongly suggested by my research into UFO physical trends. UFOs always, in almost 90% of cases, rise from a ground, to about 7m (20ft) and hover for few seconds, maybe 5-20 sec. than they shoot off at a high speed. That could be for two complementary reasons, to reduce exposure of nearby surroundings to microwaves they produce (in case a flabbergasted human is standing near by in shock & terror) and to build up the resonance because it takes a short while.

View attachment 7549
This is a mega simplified illustration of these working principles.​

Second part of the whole thing that make UFOs operate I choose to call a-piece-of-chicken method. Just to make it easier for laymen to understand. When you put a-piece-of-chicken into microwave oven, to heat it up, what causes heating up is that microwaves start rotating water molecules, because water molecules are asymmetric in one plane (actually axially symmetric). Now, my idea was that super fast rotation of molecules, at like 2.4GHz which is 2,400,000,000 times per second, general relativity would kick in and fast spinning atomic nuclei would invoke gravito-magnetic effects (predicted by GTR and confirmed by NASA with Gravitational Probe B satellite). The reason a-piece-of-chicken doesn't take off in the microwave oven is that 1) there is no holding field to line up all the atoms/molecules in the same direction, 2) microwaves are bouncing off the oven's walls in random patterns, making water molecules orientation chaotic, 3) microwaves need to be arranged into a very precise timing pattern called Larmor frequency.

Now that's what this other guy had figured out. Larmor frequency is a natural precession resonance frequency of the atomic nuclei and it depends on particular isotope and holding field strength. That is why TTSA found in UFO material samples that isotopes are arranged exactly in 33.3% each, that is to manage precession of nuclei, like a gearbox if you like. Larmor freq. is used in Nuclear Magnetic Resonance NMR machines, in hospitals, and in Electron Paramagnetic Resonance EPR machines used in chemistry. Precession of the nuclei can be managed and it's routinely done in NMR and EPR machines. One aligns nuclei up (in a line with holding field), than you turn on or off sideways microwaves. Turning microwaves on/off, through nuclei's precession, flips the nuclei from aligned with holding field, to misaligned with holding field. The time between allurement & misalignment is called relaxation time. Relaxation time is very short, for most materials, at room temperature, but if one cools the sample and coils down with say liquid Nitrogen (again, eBay stuff) one can get relaxation times much longer. We are talking miliseconds. If you repeat that nuclei flipping process, say million times, which would take only few seconds, you start reducing gravitational and inertial mass of the material through accumulated resonance. It is very similar to adiabatic magnetic cooling, but you are reducing mass, instead of temperature.

As I said, Larmor frequency depends on the material and holding field's strength. Right material and wrong microwave frequency and you get nothing. Right material, right microwave frequency, wrong holding field strength, you would get nothing. One needs to get all three right, plus the timing and anything will fly. Equations are available online, so it's not that hard. That's is exactly why Hutchinson was struggling. He simply stumbled on the effect while playing with Tesla coils (very slow microwaves) and Van der Graaff generators (strong electrostatic holding field). Larmor frequencies are listed online for different materials. The best are Hydrogen and Sodium, but among metals Aluminum is the ticket.

Essentially, one needs a well equipped RF/microwave laboratory, some instrument integration and programming skills, few DIY devices, like C-shaped electro-magnet and you are good to go. And few other pieces, but lets not bog ourselves down with details.
So it's like laminar flow? they are literally using sound waves? Cause to my understanding the Quantum wave function may not be something a magnetic field could tune.
 

Dejan Corovic

As above, so bellow
So it's like laminar flow? they are literally using sound waves? Cause to my understanding the Quantum wave function may not be something a magnetic field could tune.

Sorry, I never said that. The way it works is, some big part of UFO, like outer hull, is held under strong but static holding field (can be electric, can be magnetic, or slow electro-magnetic, just a question of engineering). Than microwaves, at square angle to holding field, are illuminating that part (hull, for example). That is done with a certain time pattern, that takes care of Larmor frequency and nuclei's relaxation time.

Microwave timing pattern is critical. It must match Larmor frequency and nuclei relaxation time. Net effect is that mass, both gravitational and inertial, are erased. Than UFO floats like a balloon and you push it around with say a rocket engine, or hot air exhaust etc. If object has near zero mass, one can achieve stupendous speeds. If one gets to zero mass, which is easy in outer space, because one gets free cooling to near absolute zero (thus extending nuclei relaxation time), one can get supernatural speeds. No warp drives needed.
 
Last edited:

Shadowprophet

Truthiness
Sorry, I never said that. The way it works is, some big part of UFO, like outer hull, is held under strong but static holding field (can be electric, can be magnetic, or slow electro-magnetic, just a question of engineering). Than microwaves, at square angle to holding field, are illuminating that part (hull, for example). That is done with a certain time pattern, that takes care of Larmor frequency and nuclei's relaxation time.

Consider for a moment, The Hubble constant, To move an object really rapidly, All one would have to do is decrease its mass, inertia is a property of mass, With no inertia. An object would not expand with the Hubble constant.

I think the Drives are "Quantum phase" in nature If you alter the properties of mass for a given object somehow.
Virtual particles Virtual particle - Wikipedia These particles phase in and out of existence. If we could harness this method. One could Literally stop their inertia, Now, If we could have finite control over the inertia of something, one could literally stop an object in its tracks allowing the universe to expand while it sits still.

Although I like your theory, I honestly feel there is no way every speculated craft could be using the exact same method.
One thing about the whole idea of propulsion I never bought into was the idea that one would need to push or pull an object within a space that's constantly in motion.

I feel the Trick to The speed of UFO's is something more physical than Laminar frequency.
Though I do Like your theory, And it is a good read. But imagine the resource of being able to alter one's inertia. To come to a complete standstill allowing the universe to do the brunt force of the work. Part of engineering is being responsible with resources and the power one has to spend for the desired output. I somehow feel that the glowing and electromagnetic effects seen from some craft are literally just how fast they were traveling through wind shear. Literal wind burn.
 

Dejan Corovic

As above, so bellow
Consider for a moment, The Hubble constant, To move an object really rapidly, All one would have to do is decrease its mass, inertia is a property of mass, With no inertia. An object would not expand with the Hubble constant.

I think the Drives are "Quantum phase" in nature If you alter the properties of mass for a given object somehow.
Virtual particles Virtual particle - Wikipedia These particles phase in and out of existence. If we could harness this method. One could Literally stop their inertia, Now, If we could have finite control over the inertia of something, one could literally stop an object in its tracks allowing the universe to expand while it sits still.

Although I like your theory, I honestly feel there is no way every speculated craft could be using the exact same method.
One thing about the whole idea of propulsion I never bought into was the idea that one would need to push or pull an object within a space that's constantly in motion.

I feel the Trick to The speed of UFO's is something more physical than Laminar frequency.

It's not a theory. It had been experimentally confirmed twice, by Hutchinson and by this other guy. I just want to get some investment to experimentally confirm it third time.
 

Shadowprophet

Truthiness
It's not a theory. It had been experimentally confirmed twice, by Hutchinson and by this other guy. I just want to get some investment to experimentally confirm it third time.
I'm not saying laminar Frequency is a theory, it's not, I'm saying, I don't think that's what's powering UFOS is all.
It's not that I'm not speaking clearly, It's that people don't want to accept my opinions, Well, There it is bro. There it is.

The issue here is, You have a very studious theory about how they are proposing I can see you have put a lot of work into it. I applaud that. But no, This ain't it bro.

If the laminar frequency was what was powering UFOS We would already be using our antigravity self-driving cars today brother. we would have antigravity. Things would be different, I see your theory, I understand it... It could be reproduced in a garage for fifty dollars, And yet. We still aren't flaying around in our UFOS yet. It's not a matter that I don't understand Or overlooked.. This Is my opinion,. Accept it or not brother. I got weed to smoke.
 

Shadowprophet

Truthiness
Believe me, I'm not trying to be mean, here, People leave me absolutely no choice but to put my foot down and call bullshit sometimes, being Mr nice guy gets me comments like I'm retarded or something that I need to reread or reunderstand something. SO, I'm just calling bullshit. and you made me do that. I tried to be nice. By the way, I'm still nice, It's a nice theory... But I don't think laminar frequency is it.

We could go on and talk about modulated standing waves, We have with sound been able to do this. But, I just don't feel like that kind of propulsion would be something that could pull off the kinds of things we have observed UFOS purportedly do.
 
Last edited:

Dejan Corovic

As above, so bellow
It's a free country, call it what you want.

It's not laminar frequency. It's Larmor frequency, frequency at which atomic nuclei is precessing. UFOs flip atom's nuclei in and out of alignment with static fields. Microwaves and static E or M fields are supported by a lot of physical data trends in UFO witness testimonials and in two cases it was measured, in RB-47 ELINT spy plane training mission case and by Ray Stanford and his mobile electronics laboratory team.

No other UFO propulsion theory had been experimentally confirmed twice in a full public view.
 
Last edited:

Shadowprophet

Truthiness
I feel if anything they are using ionic proplsion
It's a free country, call it what you want.

It's not laminar frequency. It's Larmor frequency, frequency at which atomic nuclei is precessing. UFOs flip atom's nuclei in and out of alignment with static fields. Microwaves and static E or M fields are supported by a lot of physical data trends in UFO witness testimonials and in two cases it was measured, in RB-52 ELINT spy plane training mission case and by Ray Stanford and his mobile electronics laboratory team.

No other UFO propulsion theory had been experimentally confirmed twice.
I think that's where we are getting off track. I was reading on Literal laminar frequency, Laminar Transformation of Frequency Organization in Auditory Cortex Larmor frequency, To be fair, I need to read up on what this is before we continue. I will be back.


Edit Larmar frequency, Larmor Frequency
It's just as you explained it. Now, I ask you. You believe, The propulsion of UFO's is using Magnetic torque to purpose? at finite angles? Well, What kind of power would a craft need to exert this much force? Nuclear Or antimatter I'd imagine?

I do like your theory now that I'm on the literal right page. I'm still in the inertia camp though. I feel the process the craft are using is much less resource demanding,.

I only think this because to travel such great distances at such speeds the need for a form of propulsion that didn't demand a great deal of power would be paramount.

Consider, By our understanding and the system you are using. It would take so much power to achieve those kinds of speeds, We simply couldn't achieve those speeds because the power source would weigh more than the craft.

Can you not at least consider a metamaterial that functions as a virtual particle to interact with inertia?


No one ever does :(
 
Last edited:

Dejan Corovic

As above, so bellow
According to the "other guy", he compared Larmor's frequency of Aluminum and microwaves measured in RB-47 case and he found an exact match. I checked and didn't find it so. It's possible that there is some misunderstanding on my part, because it depends on a strength of magnetic field.
 
Last edited:

Shadowprophet

Truthiness
According to the "other guy", he compared Larmor's frequency of Aluminum and microwaves measured in RB-52 case and he found an exact match. I checked and didn't find it so. It's possible that there is some misunderstanding on my part, because it depends on a strength of magnetic field.
To be fair now that I am on the right page I do like your theory more,

The power source is what bothers me now. It would have to be nuclear or antimatter, But, Yeah, I do believe your theory would function, But, By our technology, our standards we wouldn't be able to achieve the kind of power a craft like that would need.
 

Dejan Corovic

As above, so bellow
It would have to be nuclear or antimatter,

Please, re-read. No need for nuclear power. As I said, it works with energy buid-up through resonance. UFO can lift itself up with a regular size car battery. UFO is more or less floating like a balloon.

In one of doesens of contradicting reports after Roswell UFO crash, they said that they didn't find an engine on board. This experimentally confirmed theory explains why.

Anyway, for the savy, here are the tech. specs of RB-47 ELINT spy plane case:

Back in 1957 there was a chance encounter between ELINT (Electronic Intelligence gathering) equipped bomber RB-47 and UFO, RB-47 adopted for ELINT surveillance and loaded with the most sophisticated electronic equipment of the day and the best trained crew, was flying on a training mission, when UFO as big as a barn approached them. UFO was emitting huge amounts of microwave radiation. RB-47 had passive radar antennae spinning at 300rpm and the crew got this electromagnetic data out of it:

frequency ................................... 2.995..3.000GHz
pulse width ................................. 2.0mSec
pulse repetition frequency .......... 600Hz
sweep rate .................................. 4.0rpm
polarity ........................................ vertical
 

Shadowprophet

Truthiness
Please, re-read. No need for nuclear power. As I said, it works with energy buid-up through resonance. UFO can lift itself up with a regular size car battery. UFO is more or less floating like a balloon.
so, It's this Angle they force with the larimar frequency to achieve such speeds?

I'll be honest, I'm inclined not to buy into it, however, I fully believe that such speeds should be possible with little to no power. I am just in that camp of people who believe the entire process is based around the expansion rate of the universe.

In my theory, they are able to stop a crafts motion completely, Thusly negating its expansion rate, a relativity trick.
Still. I am all on board that such speeds could be achieved efficiently with the kind of power a car battery could produce.
 

Shadowprophet

Truthiness
I'd like to bring to your attention something about UFOS, from reports that I always found strange, The outside of the craft is always this building-sized thing no bigger than a small aircraft, But to those people inside, That tells stories of being inside the craft it's always full of rooms. tables the beings themselves, where are the engines?

Maybe you are right, Maybe they are using the hull of the craft to prepulse magnetically.
I've never heard the story where the abductee found themselves in the engine room.. So I'm beginning to think they don't have conventional engines as we would normally imagine.

You would think though, That using magnetic propulsion would be problematic as just about everything of great mass has its own magnetosphere for instance, Mars Magnetosphere is vastly different than earths. would this not be a huge problem for space travel? Consider the EM interference, A thunderstorm could take one down.
 

Dejan Corovic

As above, so bellow
so, It's this Angle they force with the larimar frequency to achieve such speeds?

I'll be honest, I'm inclined not to buy into it, however, I fully believe that such speeds should be possible with little to no power. I am just in that camp of people who believe the entire process is based around the expansion rate of the universe.

In my theory, they are able to stop a crafts motion completely, Thusly negating its expansion rate, a relativity trick.
Still. I am all on board that such speeds could be achieved efficiently with the kind of power a car battery could produce.

This is how it works. Gravity is a process very similar to thermodynamics processes. When one flips nuclei, in and out of alignment with magnetic/electric field, he "cools" gravity down to near-zero or zero gravity. Object looses weight and inertia. Basically whole thing works like a gravitational equivalent of a refrigerator. There are magnetic fridges that work on resonance, tested long time ago in various universities. Google "adiabatic magnetic cooling".
 
Top