Do you mean like a teleportation system ? If that is what you mean, it should be possible. i just had an idea on how to make magic possible once again on earth. Magical energy being life-force energy which is identical to gravitational waves, it should be possible to use a network of MAGVID devices on LEY lines to activate the earth once again. The MAGVID devices would need to be pulsed on and off in-order to allow the waves to escape the MAGVID devices.
As for the SPWM signals, it is the work of the filter to clean it up reasonably before being fed to the four coil system. It doesn't need to be 100 percent perfect sine wave for it to work as it should. Provided you follow the normal rules of designing high frequency electronic circuits, you should be safe.
Dejan Corovic
As above, so bellow
No, I don't mean like teleportation.
Just entanglement, meaning, when you flip one Macroscopic Quantum Objects ( MQO ), other MQO flips in the opposite direction.
Like, to entangled MQOs would have opposite magnetic fields. One would have North pole up and other would have north pole down.
But we need to figure out how we can move these MQOs in a controllable way. Probably they can be pushed & pulled with some kind of antennae?
Last edited:
spacecase0
earth human
so, have been busy for a bit,
I do wonder why the MAGVID needs 4 channels out to drive the coils,
at least when I tried it, 2 of the channels needed are identical to the other 2, so you just flip the leads on the coils and you only need 2 amplifiers,
and if you are doing radio frequency and only one frequency, you can use a 1/4 wave delay line made of coax cable...
in that case you only need one power transistor.
if you couple your coils with a capacitor (or just use resonant coils), you can use square wave input and the output is a sine wave.
but the limit there is it is only good for a narrow set of frequencies
any clue as to the required frequency ?
I tried with the electrons orbiting just past the coils at 85% the speed of light (faster than that they just radiate energy, but that might be why it works in the first place, so I should have tried for higher)
and something like 40KHz as well just to check.
but I guess I missed the real trick of having electrons to orbit in the first place...
should have out an ion source in the room with the tests.
anyway, I should get a building to go set up all this again in a few weeks, but time will tell me if this actually happens.
but would love to know what frequency range to go for as I have little clue right now
as far as the entangled bagle coil, as long as you keep power into the coil, they seem to follow the coil pretty well.
also a copy is going to be where you made it,
so power one up, and keep it going to some small percent,
then power up a new one in the same physical spot you started the first one, and it should be a copy,
or at least that is how I would try it based on my experiance with the curious device that made them and entangled them.
I do wonder why the MAGVID needs 4 channels out to drive the coils,
at least when I tried it, 2 of the channels needed are identical to the other 2, so you just flip the leads on the coils and you only need 2 amplifiers,
and if you are doing radio frequency and only one frequency, you can use a 1/4 wave delay line made of coax cable...
in that case you only need one power transistor.
if you couple your coils with a capacitor (or just use resonant coils), you can use square wave input and the output is a sine wave.
but the limit there is it is only good for a narrow set of frequencies
any clue as to the required frequency ?
I tried with the electrons orbiting just past the coils at 85% the speed of light (faster than that they just radiate energy, but that might be why it works in the first place, so I should have tried for higher)
and something like 40KHz as well just to check.
but I guess I missed the real trick of having electrons to orbit in the first place...
should have out an ion source in the room with the tests.
anyway, I should get a building to go set up all this again in a few weeks, but time will tell me if this actually happens.
but would love to know what frequency range to go for as I have little clue right now
as far as the entangled bagle coil, as long as you keep power into the coil, they seem to follow the coil pretty well.
also a copy is going to be where you made it,
so power one up, and keep it going to some small percent,
then power up a new one in the same physical spot you started the first one, and it should be a copy,
or at least that is how I would try it based on my experiance with the curious device that made them and entangled them.
Dejan Corovic
As above, so bellow
How did you do that?
Before i reply your questions, let me state the conditions that the full application of the MAGVID principles bring about as it is relevant to the question of entanglement, FTL communications, teleportation and manipulation of physical reality ( otherwise known as magic ) and other things i don't have the time at the moment to explain.
The full application of the MAGVID principle aims to bring about a SHIFT ( as stated in the philadephia experiment ). This SHIFT entails modifying the rate at which time flows in a particular region of space which in the case of the MAGVID device, the space in which it encloses. To bring about such a SHIFT entails modifying the Ambient Gravitational potential field in the space enclosed by the MAGVID device. In addition to the change in gravitational potential field generated by the electrical vortex of the MAGVID device, there is also standing gravitational wave also generated by the vortex as a side effect.
NB: Using MAGVID Principle of generating an electrical vortex, a shift in ambient gravitational potential field without the destructive internal gravitational forces is accompanied by a standing gravitational wave and unlike standing E-M WAVES that dissipated once the external influence generating them is removed ( with the exception of pair production), standing gravitational waves can persist for a long time, even longer i suitable materials like water and with special techniques salt and metals. This process of storing gravitational wave energy which is life force energy or MAGIC forms the basis of ALCHEMY.
Now getting back to the process of entanglement, this is simply communication between two or more systems in which their internal TIME clock runs at a different rate ( extremely fast ) than our ambient TIME rate. Entanglement, subspace or FTL communication all the same thing.
You could easily generate an external Gravitational force field in order to move your MAGVID device while keeping the gravitational potential field value ( TIME RATE) constant as stated in the MAGVID files.
You cant just use any design or else you will have no success with your work. you can not use a 1/4 wave delay line made of coax cable for any MAGVID application as the voltage and current will not be in phase and no power will be delivered to your system.
For the MAGVID pure sine wave inverter which does not require central coil, any frequency will do. Just remember that output voltage is directly proportional to field strength and frequency.
For other MAGVID devices which require central coil ( the devices that cause a SHIFT ), minimum frequency in air on earth is at least 10MHZ. i will start with 32MHZ. In this case, i will use Dejan Corovic method of generating sine wave as MCUs have not yet matured enough to use them at this frequency range.
Multiple four coil system arranged in a circle are needed for a practical MAGVID spacecraft just like searl effect device. Living Quarters will be in the middle of the wide central magnetic field coil. Only one four coil system is needed for a MAGVID pure sine wave inverter.
i will try to draw a schematic if i have the chance.
i am looking to raise at least $12,000 for this work. build the inverter first to confirm the MAGVID principle and gain a measure of confidence. Then build the full MAGVID device in lieu of making the philosopher stone and gaining the resources required to delve into R&D in-order to be truly free.
There are alot of things on my mind but no resources to do them. I have gone into betting in order to see if i can raise funding on time but time will tell if it works out.
Dejan Corovic
As above, so bellow
How the hell can one "easily create external gravitational field".I know aliens can do it, but us humans maybe not
Activate your imagination. consider a straight line --------. At both ends of this straight line are a pair of coil facing each other. Now consider another pair of coil at right angle to this pair in the form of a cross. This CROSS forms a four coil system. Now pick 12 of this CROSS ( four coil system ) and join them end to end such that they form a CIRCLE. Place the central coil inside this circle.
I know aliens can do it, but us humans maybe not
Each of the CROSS forming the CIRCLE has a rotating magnetic field so when they are in phase i.e. the individual RMF have zero phase difference, they generate a resultant G-potential field with no resultant G-force field hence no movement.
For movement in a particular direction, alter the phase difference between the two sides of the CIRCLE.
spacecase0
earth human
you choose an orbit size, look at the angular momentum of an electron at the speed you want, figure out how strong of a magnetic field you need to keep thge electrons in orbit and then design a magnet to keep them where you want, then design your accelerator coils and the RF power system to drive it all.
it is basically a circular open air electron accelerator
go look up how cyclotrons work, then change the electric field drive system to a 4 phase magnetic one.
that is why I used a 1/4 wave delay line.
you need 4 phases of sine wave power from one source. 2 of the phases are 180 degrees out, so you just flip the wires for them,
this leaves you with needing to make 90 degrees from your source, and a 1/4 wave delay line does this perfect.
and I ran 1/2 or 1 wave (can't remember what one) feed lines to all the coils so there would be no issue with how long it takes the signals to get to the coils.
my issues were that I had no electrons for the magnetic field to push around and I did it in a metal building that likely made to many reflections to make a clear vortex. I used 4 separate single turn one wavelength coils (that were bent in so the electron path would not be messed up)
Last edited:
MCUs are not yet up to the task. Your ideas is great for all MAGVID related devices including the MAGVID inverter even though it will cost a little bit more. Can the boards you mentioned here generate phase shifted signals (90 degrees) to feed into the two Amplifiers required?
Dejan Corovic
As above, so bellow
TBH I don't know if phase shifting will work with AD9833 and AD9834. These are quite cheap and basic devices. Maybe one can design variable phase shift externally, by adding a capacitor or inductor?
A
i will check for suitable boards that have independent channels for the project including the AMPS on google and reply back.
Signal Generator AD9106 $115 minimum estimated price MIKROE Waveform 4 Click - DEV-20486 - SparkFun Electronics.
or from aliexpress https://www.aliexpress.com/item/1005003602297115.html at a more cheaper price
i will check for suitable amplifiers for the board.
Last edited:
6W 1MHz~130MHz (180mhz) Power Amplifier High Frequency RF Broadband Amplifier
https://www.aliexpress.com/i/1005004187686064.html6W is at 130 MHZ, the lower the frequency, the higher the output power. This is suitable for the MAGVID inverter and and for the MAGVID charging device for the philosopher stone production. Use 13.65mhz for the inverter.
Dejan Corovic
As above, so bellow
U' da boss!
But it only can output one same frequency on all x4 channels ( but with different phase shifts )? Is that so?
Last edited:
Yes, You are correct. But it is suitable for our needs as i think it can be interfaced with MCUs.
CRITICAL UPDATE CONCERNING THE MAGVID DEVICE
There are two kinds of SHIFT that occurs with the MAGVID device
a) Internal SHIFT (with or without central coil generating magnetic field) : This kind of SHIFT in space and time occurs within the electrons being pumped and moved in a spiraling toroidal motion by the RMF (rotating magnetic field). This shift in space and time within the electrons being pumped and moved in the output coil wire is responsible for the free energy generation as it causes energy to be drawn from zero-point vacuum (ether).
b) External SHIFT (with central coil generating magnetic field) : This kind of SHIFT occurs in tandem with internal SHIFT. It is responsible for SHIFTING not just the pumped electrons but the space in the which the pumped electrons envelop (with could be a spacecraft or a MAGVID charging device for the production of the philosopher stone).
BOTTOM LINE : A SHIFT always occurs within all MAGVID related devices with or without the central coil magnetic field or permanent magnets.
CORRECTION ABOUT HOW TO CONTROL THE VORTEX GENERATING EXTERNAL SHIFT
Since the vortex is self sustaining, in-order to control the vortex movement and navigational control for a MAGVID spacecraft, you will have to reverse the RMF direction on some legs of the 12 four coil system making of the vortex generating system instead phase control as i wrote on this issue in my previous posts addressed to you.
There are two kinds of SHIFT that occurs with the MAGVID device
a) Internal SHIFT (with or without central coil generating magnetic field) : This kind of SHIFT in space and time occurs within the electrons being pumped and moved in a spiraling toroidal motion by the RMF (rotating magnetic field). This shift in space and time within the electrons being pumped and moved in the output coil wire is responsible for the free energy generation as it causes energy to be drawn from zero-point vacuum (ether).
b) External SHIFT (with central coil generating magnetic field) : This kind of SHIFT occurs in tandem with internal SHIFT. It is responsible for SHIFTING not just the pumped electrons but the space in the which the pumped electrons envelop (with could be a spacecraft or a MAGVID charging device for the production of the philosopher stone).
BOTTOM LINE : A SHIFT always occurs within all MAGVID related devices with or without the central coil magnetic field or permanent magnets.
CORRECTION ABOUT HOW TO CONTROL THE VORTEX GENERATING EXTERNAL SHIFT
Since the vortex is self sustaining, in-order to control the vortex movement and navigational control for a MAGVID spacecraft, you will have to reverse the RMF direction on some legs of the 12 four coil system making of the vortex generating system instead phase control as i wrote on this issue in my previous posts addressed to you.
Last edited:
one boards can be used for each leg of the 12 four coil system (12 boards in total) and be tied to a central MCUs for management purposes so you are correct in your previous posts about this issue.
i will explain more about navigational control of MAGVID Spacecraft when we get to Experimentation stage.