August
Metanoia
You won't be laughing when we leave you on this hellish planet all alone.
Repent while you can is my advice. Where is Harold Camping anyways?
Good old Harold.
You won't be laughing when we leave you on this hellish planet all alone.
Repent while you can is my advice. Where is Harold Camping anyways?
I had seen that company's products before,
sounds like a good plan, they don't look that hard to make.What method of preparation of the electret?...magnetoelectrets I believe have a shorter time at higher temps where they are more stable and have a higher storage capacity...
Any eddy currents that are created in a conducting copper piece usually circulate around the copper so any type of disruption in that circulation will
- (new list point): these magnetic fields will likely induce eddy
currents in the copper, which makes the whole thing messier and
harder to understand
Any eddy currents that are created in a conducting copper piece usually circulate around the copper so any type of disruption in that circulation will
distort the path of the current making it less able to interact with any external magnetic field...If it's a copper sheet for instance then drilling a series of holes in the copper will most likely be sufficient...
Fused silica is amorphous and not crystalline. Hmmm... they GROW synthetic quartz
crystals used in crystal oscillators where piezoelecticity is the effect they make use of.
Synthetic quartz crystals cannot be grown to the size required in the ARV's gravitator. Not sure
how large they get in nature.
And there's more than one type of fused silica, I just learned. If there's one that is not piezoelectric,
it might work as the dielectric in the ARV's gravitator.
/Mathias Båge
have been reading the PDF that Mathias Båge posted,
a few details that would be hand to know that I did not find,
what is the spin rate of the magnetic field ?
it is mentioned that it is much faster than 60Hz AC power, but not how much faster.
spacecase0 said:and also tells of the power needed, says that 40M joules is not really enough
but that is an hour to charge it if I connect my home mains power and ask all that the wiring will take. nothing that I could get out of a battery.
so what powered this thing ?
if it is all true,
then you could build something with your mind and bring it back for the second time you run it...
also, if they ran it on an ocean ship, it had water on one side. so makes me think it is very likely not electrons that is the vortex. but either way, it is some sort of vortex, so I guess it does not matter to much other than kind of wondering if you can build this on the ground in a building and have it work ok
the power requirements are what really gets me,
my guess is that the field decays in way less than an hour,
so how would I get and convert enough power to even test this ?
the Wayback Machine looks at the robots.text file on any website it archives
so, if a website tells them not to archive them anymore, they automatically pull the site offline as far as the archives.
so my guess is that all the work of pulling the pictures offline was done on the side of UFO Casebook
I found this page on the Stefan Marionv's Magvid By Vencislav Bujic
It's got some good illustrations worth checking out.
Stefan Marinov's Magnetic Vortex Hyper-Ionization Device (MAGVID)
Now Check Your Six O'Clock for Boogies~
This is what the link has to say about Stefan Marionv
"This page is dedicated to the memory of Stefan Marinov and his device titled "Magnetic Vortex Hyper-Ionization Device". It was reported that Marinov was working on it, which means working with real device that he build, just one month before his sudden, unexpected death. There is high chance that his death has connection to the testing of this device, and that it was not 'suicide' as officially stated. Marinov was good Christian and nobody expected him to commit suicide. According to official news he presumably jumped off from the top of the four level outside emergency staircase of the Bibliotheque in Graz, Austria, but nobody actually saw him jumping off. He was still alive, not even bleeding, when an ambulance and police arrived, Marinov died on a way to hospital. The police never notified anybody, including his son in Bulgaria. They sealed his apartment, not letting anybody inside, and also refused to release any letter found there, and refused giving any information"
* I corrected a couple of the machine translation errors. Otherwise intact and another all too familiar story.
are you talking of the image that you linked to on page 4 of this thread called fCv4nT8.jpg ?
if so I have a copy
I guess you've read what I think about Stefan Marinov not being James Stephens? Marinov's style of writing is just so different from Stephens'. Can you, as someone with english as your mother tongue see if James Stephens' mother tongue is also english?
And yes, I've seen Vencislav's illustrations before, but he interpreted James Stephens' text differently that I did, and placed the central static magnet away from the four excitation coils.
/Mathias Båge